November 7, 2026 · 11 min read · Sugam Budhraja

Medicare's 2027 RPM Final Rule: Vendor Staff Ban Delayed to 2029, Initiating Visits Start in January

CMS finalized most of its remote monitoring crackdown on 4 November 2026, but gave practices two more years before contracted clinical staff stop counting and reversed one of its proposed payment cuts. What the final rule changed from the proposal, the initiating visit rules in detail, what vendors can still sell, and what to do before January.

In July, CMS proposed to stop paying for remote patient monitoring done by outsourced nurses from 1 January 2027. Vendors whose business is supplying those nurses had six months to reinvent themselves.

They now have two years and two months. The CY 2027 Medicare Physician Fee Schedule final rule, released on 4 November 2026, finalizes almost everything CMS proposed for remote physiologic monitoring (RPM) and remote therapeutic monitoring (RTM), but delays the employed-staff requirement to 1 January 2029 [1][2]. It also quietly drops one of the proposed payment cuts, and grandfathers every patient already being monitored.

We covered the proposal in Medicare wants RPM run by practices, not vendors. This is what the final rule actually says, read from the rule text rather than the summaries, and what practices and vendors need to do before January.


What changed in the 2027 RPM final rule?

Proposal (July 2026)Final rule (November 2026)When
Pay only when clinical staff are employed by the practiceFinalized, delayed two years; contracting allowed until 31 December 20281 January 2029
A separately reportable initiating visit before RPM or RTMFinalized as proposed, with clarifications; existing patients exempt1 January 2027
RTM for established patients onlyFinalized; an initiating visit can make a patient established1 January 2027
Lower values for device supply and set-up codesFinalized; cuts of 20% or more phased over two years2027 and 2028
Remove practice expense from treatment management codesNot finalized; CMS accepted that clinical staff do this workNo change
Comment on four G-codes replacing 17 codesNot adopted; possible future rulemakingNot scheduled

Sources: final rule text [1] and CMS fact sheet [2].

Two of those rows matter more than the rest. The delay gives the outsourced-staff model a defined end date rather than an immediate one. And the reversal on treatment management means the codes that pay for actually managing patients keep their value, while the codes that pay for supplying devices lose some. That is the direction of the whole rule: pay for management, not for hardware or volume.

What applies when. Source: CMS, CY 2027 Physician Fee Schedule final rule.

What is the RPM initiating visit, and who needs one?

From 1 January 2027, RPM or RTM must begin with a face-to-face visit with the billing practitioner, in person or by telehealth, at which remote monitoring is discussed with the patient [1]. Billing for monitoring cannot start until that visit has happened.

The final rule answers most of the questions commenters raised:

  • It does not have to be a dedicated visit. Monitoring must be discussed, but it does not have to be the only topic.
  • There is no deadline between the visit and switching the device on.
  • No extra documentation is required beyond what any fee schedule service needs. CMS considered, and rejected for now, rules on documenting how monitoring data will feed the treatment plan.
  • It happens once per patient. A new device, a clinical change or a change of practitioner within the same practice does not need another one.
  • Existing patients are grandfathered. Anyone receiving remote monitoring before 1 January 2027 does not need an initiating visit to continue, provided every other requirement is met.
  • No exemptions. Patients in accountable care organizations are not exempt.
  • It can establish the patient. For RTM’s new established-patient requirement, a patient counts as established once the initiating visit requirements are met.

Two cautions sit alongside those clarifications. CMS says it “discourages any misuse of enrolling beneficiaries” between the rule’s publication and 1 January to get around the requirement [1]. And telehealth initiating visits depend on Medicare’s telehealth flexibilities, which run to 31 December 2027; after that, absent new legislation, the narrower statutory telehealth rules apply [1].


Can RPM still be outsourced to a vendor?

Until 31 December 2028, yes. From 1 January 2029, not the clinical staff time. RPM and RTM codes will not be payable when the service is performed by clinical staff who are not direct employees of the practitioner or the practice [1].

CMS gave three reasons for the delay: practices need time to hire and train staff, some health systems cannot unwind existing contracts by January, and CMS itself needs to “specify additional clinical staff arrangements that may be appropriate” [1]. Commenters had asked for a delay to at least 2028; CMS gave 2029, and promised sub-regulatory guidance on acceptable arrangements before then.

The delay is not a free pass. CMS wrote that if there is “little oversight by the billing practitioner or a lack of clinical integration” between a third party and the practice, the criteria for billing are not being met today, and the practitioner should not bill [1]. Outsourced programmes with an absent physician are already non-compliant; 2029 only ends the model where they are compliant.

What vendors can still sell was the most common question in the comments, and the answer is specific:

CMS listed what practices may obtain from outside companies. Source: CY 2027 Physician Fee Schedule final rule.

CMS said the policy “was not to require billing practitioners to develop proprietary monitoring platforms or devices” [1]. Technology vendors are explicitly safe. Staffing vendors have until the end of 2028 to become something else: a technology vendor, an employer of record arrangement that CMS’s coming guidance accepts, or a partner to practices that hire the staff themselves.


How much will RPM codes pay in 2027?

Less for devices and set-up, the same structure for management, and a smaller conversion factor across the board.

  • Device supply and set-up codes are cut. CMS finalized lower practice expense inputs for 99445, 99453, 99454, 98975, 98976, 98977, 98984 and 98985, by crosswalking them to self-measured blood pressure and event-monitor codes it considers comparable [1]. CMS said it has received “very little invoice or pricing information” on the devices actually used, and believes the codes are overvalued.
  • Big cuts are phased. By statute, a reduction of 20% or more to an existing code is spread over two years, so no existing code can fall by more than 19% in 2027 [1]. Expect a second step in 2028.
  • Treatment management keeps its practice expense. CMS proposed to remove it from 99457, 99458, 99470, 98979, 98980 and 98981 on the theory that clinical staff are not typically involved. Commenters pointed out that the code descriptors include clinical staff time, and that it made little sense to require employed staff while valuing the codes as if staff did no work. CMS agreed and did not finalize the change [1].
  • The conversion factor falls. The 2027 qualifying APM conversion factor is 1.83% lower than 2026’s $33.5675, and the non-qualifying factor 2.31% lower [1][3].
  • More changes are coming. The AMA told CMS that practice expense for all 19 RPM and RTM codes will be reviewed at the RUC’s January 2027 meeting [1]. Values in the 2028 rule may move again.

CMS did not publish per-code dollar figures in the rule text, and they vary by locality. Read your own fee schedule lookup before forecasting.


Did CMS adopt the RPM G-codes or new documentation rules?

As useful as what changed is what did not:

  • No G-codes. The idea of collapsing 17 codes into four monthly bundles is shelved for “possible future rulemaking” [1]. The 2026 code set, including the two-day 99445 and the ten-minute 99470, stays.
  • No new documentation rules for the initiating visit or for how data feeds the treatment plan.
  • No definition of “direct employee” yet. That is what the promised guidance is for.
  • No outcome requirements. Some commenters asked CMS to limit payment to conditions with strong evidence for remote monitoring, or to tie it to quality. CMS noted the comments for the future [1].

The last point is where CMS’s thinking is visibly heading. In the same rule, it distinguishes RPM from its ACCESS model, which pays for technology-enabled chronic care based on whether patients hit outcome targets rather than on activities performed [1]. We read the ACCESS payment rules in three governments just made wearable data a regulated input. Fee schedule RPM is being tightened as an activity-based benefit; outcome-based payment is being built next to it.


Can consumer wearables be used for Medicare RPM?

The device rules have not changed. A Medicare RPM device must meet the FDA’s definition of a medical device and transmit physiologic data automatically, not from readings the patient types in, which is why most programmes use connected blood pressure cuffs, scales, glucose meters and pulse oximeters rather than consumer wearables [4]. Nothing in the final rule moves consumer wearables into billable RPM.

What changes is the economics around them. When a practice’s own staff must do the monitoring, staff time becomes the scarce resource, and the valuable software is the kind that tells those staff who needs attention today: which patients have stopped transmitting, whose activity or sleep has changed, who is drifting before a reading crosses a threshold. Consumer wearable and phone data is well suited to that triage role around the billable device, as we covered in do doctors use wearable data?


What should RPM practices and vendors do now?

Before 1 January 2027

  1. Build the initiating visit into enrollment for every new RPM and RTM patient: a face-to-face or telehealth visit by the billing practitioner, with monitoring discussed and recorded as part of the visit.
  2. List current patients who are grandfathered, and do not rush new enrollments before January; CMS has warned against it [1].
  3. Check RTM patient lists for anyone without an established relationship.
  4. Re-forecast revenue on lower device and set-up values, up to 19% lower in 2027 with a further step in 2028, and a lower conversion factor [1].

Before 1 January 2029

  1. Map who performs every billable minute. If contractors do, decide whether to hire, move the work in house or change vendors, and watch for CMS’s guidance on acceptable arrangements.
  2. If you are a staffing vendor, plan the transition now. Two years is enough to become a technology and workflow partner, not enough to wait and see.
  3. Make the billing practitioner’s involvement visible today. CMS says programmes with little practitioner oversight do not meet the billing criteria even before 2029 [1].
Where Sahha sits. Sahha is not an RPM device or a billing platform. It turns data from phones and consumer wearables into activity, sleep and behavioural signals through one API, with webhooks when they change, so a care team’s software can see context between billable readings and prioritise outreach. When monitoring must be done by a practice’s own staff, tools that help those staff decide who to call first become more valuable, not less.

The final rule keeps CMS’s direction and softens its timing. Remote monitoring under Medicare is becoming what CMS always said it was meant to be: care management by a patient’s own practice, started in a visit with their own clinician, paid for the management rather than the hardware. Practices have until January to change how monitoring starts, and until 2029 to change who does it.

References

  1. Centers for Medicare & Medicaid Services. Medicare and Medicaid Programs; CY 2027 Payment Policies under the Physician Fee Schedule and Other Changes to Part B Payment and Coverage Policies. Final rule, CMS-1848-F, Federal Register document 2026-22743, placed on public inspection 4 November 2026; section on remote monitoring (established patient requirements, initiating visit requirements, supervision requirements, valuation, comment solicitation). https://public-inspection.federalregister.gov/2026-22743.pdf
  2. Centers for Medicare & Medicaid Services. Calendar Year (CY) 2027 Medicare Physician Fee Schedule Final Rule. Fact sheet, November 2026. https://www.cms.gov/newsroom/fact-sheets/calendar-year-cy-2027-medicare-physician-fee-schedule-final-rule
  3. American Hospital Association. CMS issues CY 2027 physician fee schedule final rule. 4 November 2026. https://www.aha.org/news/headline/2026-11-04-cms-issues-cy-2027-physician-fee-schedule-final-rule
  4. Foley & Lardner. 2021 Remote Patient Monitoring: CMS Final Rule. December 2020. Summarises CMS’s requirements that the device meet the section 201(h) definition and digitally, that is automatically, upload physiologic data. https://www.foley.com/insights/publications/2020/12/2021-remote-patient-monitoring-cms-final-rule/

Related